Set Up AhsayPRD

April 23, 2025

This section describes the minimum setup required to start using AhsayPRD.

We assume that you have installed Windows server 2008 on a server with removable hard disks. If you are not sure on this setup, please check on Best Practices and Recommendations.

The following setup would be based on a Windows Server 2008 R2 installed on Dell R510 with an internal SCSI storage array with PERC H700.

You may use external MD1000 with PERC 6/E or external MD1200 with PERC H800. The MD1000 is an older model and may be discontinued in some countries.

Please refer to the subsequent sections on how to do the following:

AhsayPRD (DIY)